sweet-professional-the-first-shampoo

The First Shampoo 3.0

The first smoothing shampoo in the world!

980 ml

Need help? Call us at +971 4239 4666

Brand

cosmetica_beauty_products_brand1603639520.jpeg-SWEET PROFESSIONAL

Product Description

KERATIN SAFE   |   SULFATE FREE 

 Micelar shampoo. These molecules together with hyaluronic acid increase and extend the smoothing, besides controlling frizz.

  • Increased hair smoothing

  • Higher protection

  • Healthier

 

THE FIRST – FOR ALL TYPE OF HAIR

Eight ways of using the straightening shampoo

 

THE FIRST – STEP BY STEP

1- Wash hair twice with shampoo Deep Clean Step 1, leave for 5 minutes during second wash.

2- Use a blow dryer to remove up to 80% of hair humidity.

3- Shake the package of The First and then apply over 50 ml of product, according to hair length and volume.

4- Apply shampoo along the entire hair length. Gently massage from roots to the ends until obtaining creamy foam, without rubbing scalp or adding water to make foam.

5- Leave for 15 minutes and then rinse thoroughly.

6- Apply Touch of Silk Step 3 along the entire hair length and to the ends. Leave for 5 to 10 minutes and then rinse thoroughly.

7- Completely dry hair, pull it apart in thin locks and straighten 10 times with a flat iron from roots to the ends, with smooth and constant arm movements.

8- Flat iron temperature must be adjusted to hair condition: 230°C – for healthy hair, 180°C to 200°C for sensitive hairs.

 

CAPILLARY BIOPLASTY

1- Wash hair twice with shampoo Deep Clean Step 1, leave for 5 minutes during second wash.

2- Rinse, and then use a blow dryer to remove up to 80% of hair humidity.

3- Shake the package of The First and then apply over 50 ml of product, according to hair length and volume. Spread it along the entire hair length and gently massage from roots to the ends until obtaining creamy foam, without rubbing scalp or adding water to make foam.

4- Leave for 15 minutes and then rinse thoroughly. Remove excess of water with a towel.

5-In a bowl, mix: – 1 measure of Hair Treatment, Step 2 – 2 measures of Touch of Silk, Step 3

6- Apply the mix to wet hair, with a brush and a thin comb for better spreading.  . Leave for 10 minutes and then rinse thoroughly.

7- Completely dry hair, pull it apart in thin locks and straighten 10 times with a flat iron from roots to the ends, with smooth and constant arm movements.

8- Flat iron temperature must be adjusted to hair condition: 230°C – for healthy hair, 180°C to 200°C for sensitive hairs.

 

CAPILLARY BIOPLASTY FOR BLONDE HAIR

1- Wash hair twice with shampoo Deep Clean Step 1, leave for 5 minutes during second wash.

2- Use a blow dryer to remove up to 80% of hair humidity.

3- Shake the package of The First and then apply over 50 ml of product, according to hair length and volume.

4- Apply the shampoo along the entire hair length. Gently massage from roots to the ends until obtaining creamy foam, without rubbing scalp or adding water to make foam.

5- Leave for 15 minutes and then rinse thoroughly.

6- In a bowl, mix the Toner Platinum mask and Touch of Silk Step 3 in same proportions.

7- Remove hair humidity with a towel and apply the mix with a brush. Leave for 10 minutes and then rinse thoroughly.

8- Dry hair 100%, pull apart in thin locks and straighten 10 times with a flat iron from roots to the ends, with smooth and constant arm movements.

9- Flat iron temperature must be adjusted to hair condition: 230°C – for healthy hair, 180°C to 200°C for sensitive hairs.

 

SEMI PERMANENT

1- Wash hair twice with shampoo Deep Clean Step 1, leave for 5 minutes during second wash.

2- Rinse, and then use a blow dryer to remove up to 100% of hair humidity.

3- Shake the package of The First and then apply over 50 ml of product, according to hair length and volume. Spread shampoo along the entire hair length and gently massage from roots to the ends until obtaining creamy foam, without rubbing scalp or adding water to make foam.

4- Leave for 15 minutes and then rinse thoroughly. Dry the hair 100% again.

5- Apply Hair Treatment Step 2, with a thin comb and a brush. Spread along the entire hair length and pull it apart in thin locks.

6- Leave for 20 minutes and then rinse thoroughly. At the washbasin, apply Touch of Silk Step 3 along the entire hair length and to the ends. Leave for 5 to 10 minutes.

7- Dry hair 100%, pull apart in thin locks and straighten between 10 to 15 times with a flat iron from roots to the ends, with smooth and constant arm movements.

8- Flat iron temperature must be adjusted to hair condition: 230°C – for healthy hair, 180°C to 200°C for sensitive hairs.

 

PERFECT CURLS

1- Wash hair with shampoo Deep Clean Step 1, to remove impurities and oiliness. If necessary, repeat the operation.

2- With a towel, remove excess of hair humidity.

3- Shake the package of The First and apply over 25 ml. Spread along the entire hair length. Gently massage from roots to the ends until obtaining creamy foam, without rubbing or adding water.

4- Leave for 10 minutes and then rinse thoroughly. At the washbasin, apply Touch of Silk, Step 3, and leave for 5 to 10 minutes. Then rinse.

5- Completely dry hair and do a strand test to establish temperature to be used in the flat iron, and number of times you will pass it.

6-After diagnostic, iron all hair in thicker locks at a faster pace.

7-The ideal temperature must be around 180C° to 200C° and iron between 2 to 6 times.

8- After ironing hair, take the client to the washbasin and wet hair again. Apply Touch of Silk Step 3, and leave it for 5 to 10 minutes. Then rinse thoroughly

9-Finish applying Curl styling mixed with Gloss. If you want, you may do “Fitagem” a Brazilian method to define curls. Untangle hair with combing cream, pull it apart in locks divided in three areas: inferior, superior and sides. Then apply combing cream, and finish drying, naturally or with a diffuser.

 

STRAIGHTENING, COLORING AND BLEACHING

1- Wash hair twice with shampoo Deep Clean Step 1, leave for 5 minutes during second wash.

2- Use a blow dryer to remove up to 80% of hair humidity.

3- Shake the package of The First and then apply over 50 ml of product, according to hair length and volume.

4- Apply along the entire hair length. Then gently massage from roots to the ends until obtaining creamy foam, without rubbing the scalp or adding water to make foam.

5- Leave for 15 minutes and then rinse thoroughly. If necessary, use a conditioner to untangle hair. Then dry completely.

6- Pull apart in thin locks and straighten 10 times with a flat iron from roots to the ends, with smooth and constant arm movements, at a temperature adjusted to hair condition: 230°C – for healthy hair, 180°C to 200°C for sensitive hair.

7- After ironing hair, take the client to the washbasin and wash again her hair with shampoo and conditioner, to stabilize hair ph. Then completely dry hair.

8- Do the coloring or bleaching you have chosen. After the procedure, rinse hair and apply Touch of Silk Step 3. Leave for 5 to 10 minutes, rinse and finish with a brushing.

 

ANTI FRIZZ – FOR BLONDE HAIR

1 – Wash hair with shampoo Deep Clean Step 1, to remove impurities and oiliness. If necessary, repeat the operation.

2- With a towel, remove excess of hair humidity.

3- In a measuring bowl, mix 2 portions of The First + 1 portion of hair toner shampoo.

4- Apply along the entire hair length. Then gently massage from roots to the ends until obtaining creamy foam, without rubbing the scalp or adding water to make foam.

5- Leave for 10 minutes and then rinse thoroughly. Apply Touch of Silk Step 3 along the entire hair length, and leave for 5 to 10 minutes.

6- Finish the procedure brushing hair until getting the result you want.

 

WATERPROOF

1- Wash hair with shampoo Deep Clean Step 1, to remove impurities and oiliness. If necessary, repeat the operation.

2- With a towel, remove excess of hair humidity.

3- Shake the package of The First and then apply over 25 ml of product, according to hair length and volume.

4- Apply along the entire hair length. Then gently massage from roots to the ends until obtaining creamy foam, without rubbing the scalp or adding water to make foam.

5- Leave for 5 minutes and then rinse thoroughly. At the washbasin, apply Touch of Silk, Step 3, and leave for 5 to 10 minutes.

6- Completely rinse hair, and then finish the procedure by brushing hair.

 

Send Enquiry about this product